Setting The Date And Time - Gigaset dx800a Instruction Manual

Hide thumbs Also See for dx800a:
Table of Contents

Advertisement

First steps

Setting the date and time

There are two methods of setting the date and time:
u
You can configure your base so that once the base is connected to the Internet,
the date and time is transferred from a time server.
You can activate/deactivate the synchronisation with a time server via the Web
configurator. Detailed information can be found in the Web configurator's user
guide on the enclosed CD.
u
You can set the date and time manually via the base menu or one of the regis-
tered handsets
To ensure you have the correct time for incoming calls and to use the alarm clock
and calendar, the date and time must be set.
Setting the date and time manually
If the date and time have not been set, the time will flash in the base's idle display
(00:00) and
Calls
¤
Press the key under
Enter month, day and year as an 8-digit number via the keypad,
e.g., QM 42Q for 07.14.2011. This overwrites the dis-
played date.
¤
Press down on control key s to scroll to the time entry line.
¤
Enter the hours and minutes in 4-digit format via the keypad,
e.g., QM 5 for 07:15 am.
¤
If necessary, press the display key
¤
Press the display key
32
¢
(
page
116).
§Time§
is displayed above the right display key.
Time
§Time§
on the display screen.
§Save§
to save the settings.
§am/pm§
to switch between am and pm.

Advertisement

Table of Contents
loading

Table of Contents