Table of Contents
Advertisement
Configuring settings during
an external call
Please note
For VoIP telephony, the services described
below are only available if parallel IP con-
nections are permitted.
Initiating ringback when busy/no
answer (analogue fixed line)
Please note
u
You can use this function only for calls
via the analogue fixed line.
u
A ringback display key/menu func-
tion for activating ringback only
appears on the base if the exchange
supports this feature.
If the person you are calling does not answer
or their line is busy, you can initiate ringback.
Ringback when busy: The ringback will take
place as soon as the party in question termi-
nates the current call.
Ringback when no answer: The ringback will
take place as soon as the party in question
has made a call.
Initiate ringback:
Prerequisite: You have dialled a number and
set your fixed line connection as the send
connection.
§Ringback§
Press the display key.
If ringback has been successfully activated,
the message Ringback activated is dis-
played. The call is ended. The base returns to
idle status.
If ringback has not been successfully acti-
vated in the exchange, Ringback not possi-
ble! appears in the display.
& /
T
Replace the receiver or press the
red end key.
Making calls using network services
Initiating ringback during an external
consultation call:
You wish to initiate an external consultation
call during an external call. The line is busy or
there is no answer.
¢
§Options§
Ringback
Select and press
§End§
Press the display key to return to
the party on hold.
Please note
u
You can only activate one ringback at
a time. If you activate a second ring-
back, the first one is automatically
deleted.
u
The ringback is initiated on the previ-
ously used send connection.
u
The ringback can only be received on
the device that activated the ring-
back.
Accepting a waiting call (analogue
fixed line)
You are making an external call and hear the
call waiting tone.
§Accept§
Press the display key.
Once you have accepted the waiting call,
you can switch between the two callers
("Call swapping
(VoIP)"
speak to both at the same time
¢
ence
(VoIP)"
page
Please note
u
Without CLIP, a waiting call is only
announced with a signal tone.
u
An internal, waiting call is shown on
the display. You can neither accept
the internal call nor reject it.
u
For instructions on accepting a wait-
ing external call during an internal
¢
call,
page
100.
Rejecting a waiting call (VoIP)
You can hear the call waiting tone but do not
want to speak to the caller.
§OK§
.
¢
page
56) or
("Confer-
56).
55
Advertisement
Table of Contents
