Muting The Base; Cid 2.5 Services (Network Services) - Gigaset dx800a Instruction Manual

Hide thumbs Also See for dx800a:
Table of Contents

Advertisement

Switching from handsfree to
receiver mode
c
Pick up the receiver. The speaker
on the base is deactivated.
Please note
In handsfree mode, you can adjust the
handsfree volume with the R and
S keys.

Muting the base

You can deactivate the microphone on the
receiver, base (handsfree) and any con-
nected headset (wire-bound or Bluetooth)
during an external call (including during a
conference call or when call swapping).
The other parties cannot hear you, but you
can still hear them.
Prerequisite: You are conducting an exter-
nal call.
Deactivating the microphone
P
Press the mute key. The display
shows Microphone is off.
Unmuting the microphone
P
Press the mute key again to
unmute the microphone.
If a second call (call waiting) is received in
mute mode, this is signalled acoustically as
usual. However, it is only shown on the dis-
play once the microphone has been
unmuted.
Please note
In mute mode, all keys on the base are
deactivated with the exception of the:
Mute key P
u
T
u
Red end key
end a call
S
R
u
and
keys with which you
can adjust the volume on the receiver,
speaker or headset (the speaker is
activated; the microphone remains
deactivated)
u
The function or display key that is
assigned the Headset function
¢
(
page 109)
and with which you
can transfer a call to a connected
headset.
CID 2.5 services
(network services)
If CID is activated and a waiting call is dis-
played, 4 different CID 2.5 services (network
services) are selected.
During a call:
v
Press the control key
Select with q:
Take Message
The waiting caller is forwarded to the
central office mailbox.
Hold Message
The waiting caller is put on hold and
hears a message to this effect from the
central office.
Call Back
The waiting caller is prompted by the
central office to call again at a later time.
Add 2nd
The central office is prompted to initiate a
conference call.
Note:
When the handset is muted a waiting call is not
signaled on the display. To use the CID 2.5 serv-
ices the device must be unmuted.
Making calls
with which you can
51

Advertisement

Table of Contents
loading

Table of Contents