Writing And Editing Text - Gigaset dx800a Instruction Manual

Appendix
General specifications
Interfaces analogue fixed line, Ether-
net, Bluetooth
DECT standard Supported
GAP standard Supported
No. of channels 30 duplex channels
Radio frequency 1920–1930 MHz
range
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 5 mW, average power per
channel
Range (handsets) up to 984 feet outdoors,
up to 165 feet indoors
Power supply 120 V ~/60 Hz
Environmental con- +41°F to +113°F, 20% to
ditions for operation 75% relative humidity
Dialling mode DTMF (tone dialling)
pulse dialling
Codec G.711, G.726, G.729AB with
VAD/CNG, G.722
Quality of Service TOS, DiffServ
Protocols DECT, GAP, SIP, RTP, DHCP,
NAT Traversal (STUN), HTTP
Pin connections on the fixed line
telephone jack
4 5
6
3
2 7
1 8
140
1 a
2 unused
3 unused
4 unused
5 unused
6 unused
7 unused
8 b

Writing and editing text

The following rules apply when writing text:
Each key between Q and O is
u
assigned several letters and characters.
Control the cursor with u v t s.
u
Press and hold u or v to move the cur-
sor word by word.
u
Characters are inserted to the left of the
cursor.
Press the star key * to display the table
u
of special characters. Select the required
character and press the display key
to insert the character at the cursor posi-
tion.
Press and hold Q to O to enter digits.
u
Ñ
u
Press display key
acter to the left of the cursor. Press and
hold to delete the word to the left of the
cursor.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
Setting upper/lower case or digits
Repeatedly press the hash key # to
change the text input mode.
123 Writing digits
Abc Upper case (first letter in capitals,
all others in lower case)
abc Lower case
The active mode is indicated at the bottom
right of the screen.
§Insert§
to delete the char-