Gigaset dx800a Instruction Manual page 55

When
Select All Calls / When Busy / No Answer.
All Calls: Calls are diverted immediately
i.e., no calls are signalled to this phone
number on your base.
No Answer: Calls are diverted if no one
accepts the call within several rings.
When Busy: Calls are diverted when your
line is busy.
§Send§
Press the display key.
For diverting calls from a fixed line connec-
tion:
A connection is established to the telephone
network to activate/deactivate call divert.
¤
After confirmation from the fixed line,
press the red end key T.
Please note
Diverting calls to your phone numbers
can result in additional costs. Please con-
sult your provider.
Diverting calls internally
You can divert all external calls intended for
a base receive connection to a handset or
device connected to the FAX port.
¢
v Ç Select Services
Internal Line
Select and press
¤
You can enter data in the following fields:
Activation
Activate/deactivate call divert.
To handset
Select internal party.
No HS is displayed if internal call divert
has not been set previously or if the pre-
viously set handset is no longer regis-
tered.
Ring delay
If you prefer to have a delay before the
call is diverted, select the length of the
delay (None, 10 sec., 20 sec. or 30 sec.).
If you select None, the call is not signalled
on the base and is diverted immediately.
§Send§
Press the display key.
¢
Call Divert
§OK§
.
Making calls using network services
Internal call divert is only single-stage i.e., if
calls for the base are diverted to a handset
(e.g., MT1) on which a call divert is also active
(e.g., to MT2), this second call divert is not
activated. The calls are signalled on handset
MT1.
Please note
u
Any call for the base that has been
diverted is entered in the base call
lists.
u
If a call to a receive connection that is
only assigned to the base is diverted
to a handset that is not available (e.g,.
the handset is deactivated), the call is
rejected after a short time.
Activating/deactivating call
waiting for external calls (VoIP)
If the function is activated, during an exter-
nal call you will hear a call waiting tone to
signal that another external caller is trying to
get through. If you have CLIP, the number of
the waiting caller or the corresponding
directory entry is shown in the display.
The caller will hear the ringing tone.
When call waiting is deactivated, the caller
will hear the busy tone if you are already
making a call, you are the only party
assigned to this connection and this connec-
tion is not assigned to an answering
machine.
Activating/deactivating call waiting
Prerequisite for calls via VoIP: At least two
parallel VoIP connections are permitted on
your telephone (setting can be changed via
the Web configurator).
¢
v Ç Select Services
Status Select On / Off to activate/deac-
tivate call waiting.
¤
Press the display key
Call waiting is activated/deactivated for all
connections to the telephone and all regis-
tered devices.
¢
Call Waiting
§Send§
.
53