Table of Contents
Advertisement
3. Connecting the base to the mains power supply
3
1. Insert the small jack on the power cable from the rear into the recess in
the housing.
2 Plug the jack into the port marked with the \ icon on the underside of
the base.
3 Then connect the power cable to the mains power supply.
Warning
u
Keep the power adapter plugged in at all times for operation, as the base
does not work without a mains connection.
u
Use only the power and telephone cables supplied. Pin connections on tel-
ephone cables can vary (pin connections
Now you can make calls with your base via the fixed line, and can be reached via
your fixed line number!
An answering machine on the base is set with a pre-recorded announcement in
answer and record mode
1
2
¢
¢
(
page
82).
page
140).
First steps
15
Advertisement
Table of Contents
