Setting The Automatic "Flip" Feature - American Dynamics SpeedDome Ultra VII Operator's Manual

Setting the Automatic "Flip" Feature

Use the automatic (proportional) "flip" feature when you need to track someone who walks
directly under the dome and continues on the other side. You start the flip by moving the tilt
control to its lower limit and holding for a brief period. When the flip engages, the dome
automatically rotates 180°. You may then continue to track the person as long as the tilt
control stays in its lower limit. Once the tilt control is released, the dome resumes normal
operation.
The dome is initially installed with the automatic flip feature disabled. In this situation, the
dome stops when the tilt down reaches its lower limit.
Changing the Automatic Flip Setting
1. Select Pan/Tilt/Zoom/Sync Opts from the Dome Configuration Menu.
The highlight bar appears on the Proportional Flip setting.
2. Change the setting.
• Select On to enable the flip feature.
• Select Off to disable the flip feature.
The default setting is Off.
3. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next
on page 2-7.
Configuring Pan, Tilt, Zoom, and Synchronization Options 2-3