Programming Presets - American Dynamics SpeedDome Ultra VII Operator's Manual

Hiding Privacy Zones
If you want to temporarily disable the appearance of Privacy Zones, you may "hide" them.
This allows you to keep the Privacy Zones that have been programmed while disabling their
appearance on-screen.
To hide all Privacy Zones:
1. Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu.
2. Select Privacy Zones.
The Program Privacy Zones screen displays.
3. Select Hide All Zones. Change the setting.
• Select Yes to hide all Privacy Zones.
• Select No to make all Privacy Zones active.
The default setting is No.
4. Select Exit to return to Alarms/Areas/Home/Presets/PZ screen.
5. When the Alarms/Areas/Home/Presets/PZ screen appears, select Exit. The Dome
Configuration Menu appears. Continue with What To Do Next on page 4-20.

Programming Presets

If you need to view specific places routinely, you should program presets. A preset is a
programmed video scene with automatic pan, tilt, zoom, focus and iris settings. Once
programmed, entering the number and pressing a button on your controller automatically
calls up the preset. In addition, presets may be assigned to alarm actions or as the "home"
position for the dome. As many as 96 presets, whose positions are saved in the dome's
firmware, may be programmed.
VM96 and AD matrices installed as RS-422 and SensorNet networks support "virtual views."
This means that the pan, tilt, zoom, focus, and iris settings are stored within the controller, not
the dome. You cannot use the "virtual views" that you define on those systems as the home
position or an alarm action. You must use the presets programmed using this utility.
AD168 matrices with an AD168CCM control code module support Manchester, RS-422, and
SensorNet networks and provide 64 "virtual views." All other AD matrices support
Manchester and 64 dome presets or, through the use of an AD2083-02A code unit, RS-422
networks and provide 16 "virtual views."
4-18 SpeedDome Ultra VII Operator's Manual