Overview Of Camera Settings - American Dynamics SpeedDome Ultra VII Operator's Manual

Overview of Camera Settings

When Camera Functions is selected from the Dome Configuration Menu, the following
screen appears:
From this screen you can adjust the white balance settings, set the IR mode for the camera,
enable or disable Wide Dynamic Range, set the automatic gain control (AGC) feature, adjust
the AGC level, and configure the open shutter settings.
• To change settings, move the highlight bar to the appropriate field and make the changes.
• To change the settings for this screen to the factory defaults, select Reset to Factory
Settings.
• To return to the Dome Configuration Menu, select Exit.
3-2
CAMERA FUNCTIONS
Auto White Bal
W Bal Adj: Red 0-511
AGC/Shutter
Open Shutter(NTSC)0-28 dB
Open Shutter(PAL) 0-28 dB
RESET TO FACTORY SETTINGS
OFF/ON
Blue 0-511
Max Gain Limit
1/2-1/60 s
2/3-1/50 s
EXIT
SpeedDome Ultra VII Operator's Manual