American Dynamics SpeedDome Ultra VII Operator's Manual page 72

3. Select the highlighted language. The following screen appears:
The highlight bar appears on Cancel.
4. Do one of the following:
• To continue with changing the language, select Continue. The dome automatically
resets. To verify the language change, continue with step 5. Otherwise continue with
step 6.
• To cancel the language change, select Cancel. The Language Selection screen
appears. You may choose a different language, or select Exit to return to the
Language / Password screen. Continue with step 6.
5. Start the Dome Configuration Menu. The menu will appear in the new language setting.
6. To make changes to other settings, continue with What To Do Next on page 6-6.
6-4
DOME MUST RESET TO
CHANGE LANGUAGE
SELECT CONTINUE TO RESET
CONTINUE
CANCEL
Note: Changing the language does not alter any previously programmed
names. Only default names, such as Preset 1, change to the new language
setting
SpeedDome Ultra VII Operator's Manual