American Dynamics SpeedDome Ultra Drone III Datasheet

The SpeedDome Ultra Drone III is a fixed camera housed inside
the SpeedDome Ultra chassis. This 540 line color camera – with
its choice of 1/3-inch, auto vari-focal lenses – provides a value
driven alternative for users who require fixed camera coverage,
but like the appearance and deterrence of a full-featured dome
camera.
The 370˚ pan and 90˚ tilt mechanism enables the internal
camera and the eyeball to be manually positioned in any
orientation. The friction bearings hold the camera in that fixed
position, pointing at the desired camera view. The manual
lens controls allow for zoom, iris and focus adjustments as
necessary. A dummy model is also available without a camera/
lens assembly.
speedDome
Drone III Fixed Camera
Features That Make a Difference:
I dentical in appearance to the full-featured SpeedDome Ultra
Friction bearings hold camera in set position
P owerful visual deterrent
M ultiple mounting options
5 40 line color camera inside
I nterchangeable with SpeedDome Ultra (fits standard and I/O board
mounting bases)
C hoice of 2.5 - 6 mm, 3.8 - 9.5 mm, or 9 - 22 mm auto iris lenses
Manual focus, zoom and iris adjustments
0 .65 lux CF1.2
C amera and eyeball of drone can be manually adjusted after
installation
Compatible with SpeedDome Ultra outdoor housings
For maximum flexibility, the drone can accommodate both types
of SpeedDome Ultra mounting bases – the standard mounting
base and the I/O board mounting base. This means that the
drones are interchangeable with SpeedDome Ultra without
the need for any re-cabling. The interchangeability allows you
to install the drones at a facility and then replace them with
programmable domes as budgets and/or needs change. In
addition, you can interchange the drones and the domes as
surveillance requirements change.
D A T A s h e e T
Ultra
®