American Dynamics SpeedDome Ultra VII Operator's Manual page 53

Setting Presets
Note: When presets are programmed, each preset is assigned a default name. Instructions for
assigning new names appear in Chapter 5.
1. Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu.
2. Select Presets.
The Select Preset to Program screen appears:
3. Select the number for the preset that you want to program. The Presets screen appears.
4. Adjust the camera until you see the scene you want to use as the preset. Adjust the zoom
and iris settings as necessary. When satisfied with the scene, save the preset.
5. Repeat steps 3 and 4 for each preset you want to program. When finished, select Exit.
6. When the Alarms/Areas/Home/Presets/PZ screen appears, select Exit. The Dome
Configuration Menu appears. Continue with What To Do Next on page 4-20.
Configuring Alarms, Areas, Home, Privacy Settings, and Presets
SELECT PRESET TO PROGRAM
PRESET
NUMBER
1-96
FOCUS FAR to program preset
PRESETS
PRESET X
Position camera with PAN
TILT, ZOOM and IRIS
FOCUS FAR to save and exit
PRESET NAME
PRESET 1-96
EXIT
EXIT
4-19