American Dynamics SpeedDome Ultra VII Operator's Manual page 30

Auto White Bal must be set to Off to manually change the Red and Blue settings.
Tip:
Changes to the red and blue settings occur in increments of 5.
Changing Automatic White Balance Settings
1. Select Camera Functions from the Dome Configuration Menu. The highlight appears
on the Auto White Bal setting.
2. Change the setting.
•
Select Off to manually adjust the red or blue settings. Continue with step 3.
• Select On for automatic white balance. Continue with step 7.
The default setting is On.
3. Do one of the following:
• To change the red setting, move the highlight bar to W Bal Adj: Red, then continue
with step 4.
• To change the blue setting, continue with step 5.
4. Adjust the red setting. The values range from 0 to 511.
There is no default value for the red setting.
5. Do one of the following:
• To change the blue setting, move the highlight bar to Blue, then continue with step 6.
• If you are finished making changes, continue with step 7.
6. Adjust the blue setting. The values range from 0 to 511.
There is no default value for the blue setting.
7. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next
on page 3-8.
3-4 SpeedDome Ultra VII Operator's Manual