Dome Features; Controlling The Zoom Setting - American Dynamics SpeedDome Optima Quick Reference Manual

Dome Features

The SpeedDome Optima programmable dome
camera provides the following features:
• 22X optical zoom/11X digital zoom
(242X maximum total zoom).
• 470 lines horizontal resolution
• Zoom Adjusted Programming (ZAP)
• Auto Focus / Auto Iris
• Auto White Balance
• Automatic Gain Control (AGC)
• Line-lock
• Up to 96 presets (system dependent)
• Three patterns
• Programmable home position
• Apple Peel
• Dome Flip (rotate 180°)
• One alarm input
• One auxiliary output
• Power-on functional tests
• LED diagnostics
• DirectSet menu commands for specific dome
functions
In addition, the dome may be used with the
Manchester, RS-422, RS-485, or SensorNet
protocols.
Although SpeedDome Optima does not provide
on-screen programming via the dome firmware, the
connected controller may be used to configure
many settings. These settings include:
• Programming presets and patterns
• Vertical phase adjustment (V-phase)
• Auxiliary output control
The following table provides additional information
about the supported controller functions with the
protocol used. The actual features supported may
differ for your controller.
RASO AND RASI SERIES SPEEDDOME OPTIMA
QUICK REFERENCE GUIDE
Table 1: Protocols and supported features
Feature SensorNet
Maximum
96 (a)
Presets
Maximum
3
Patterns
Resume
Auto Focus
Yes
/ Auto Iris
(b)
Dome
Yes
Reset
V-Phase
Yes
adjustment
Auxiliary
Yes
output
control
(a) The actual number of available presets may
differ based on the controller used.
(b) Pressing the Iris Open and Iris Close buttons
simultaneously returns to auto focus and auto
iris mode.
For specific information about the features
supported, see the operator's manual for your
controller.
Controlling the Zoom
Setting
Zoom stop settings define how the zoom function is
partitioned. Depending on the current zoom level,
the camera will either stop at the first zoom stop
setting or continue to the maximum zoom setting.
For SpeedDome Optima, the first zoom stop
setting is 22X (maximum optical zoom). The
maximum zoom is 242X (maximum digital zoom).
To switch between optical and digital zoom levels,
press the Zoom In (Zoom Tele) button until the first
zoom stop is reached. Release the button for at
least one second and press Zoom In again to
continue into the digital zoom range. Zooming
stops when the maximum zoom is reached.
Refer to your controller instructions for information
about the location of the zoom control buttons.
2 of 8
RS-422 Manchester
96 (a) 64
3 3
Yes Yes
Yes Yes
Yes Yes
Yes Yes
8000-2692-13, REV. C