Configuring The Display Of Name Information - American Dynamics SpeedDome Ultra VII Operator's Manual

Changing the Display of Direction Indicators
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Direction Indicator.
3. Change the setting.
•
Select On to display the direction information.
• Select Off to prevent the direction information from displaying.
The default setting is Off.
4. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next
on page 5-14.

Configuring the Display of Name Information

Use the Name Configuration Menu to select which name information appears on-screen.
To display this screen, select Name Configuration Menu from the On-Screen Text
Display screen. The following screen appears:
You can choose to enable or disable the display of camera, area, preset, pattern, and alarm
names from this screen. You can reset all programmable names to their default settings. You
may also initiate name programming from this screen. See Assigning or Changing Name
Information on page 5-10.
5-8
NAME CONFIGURATION MENU
CAMERA NAME
AREA NAME
PRESET NAME
PATTERN NAME
ALARM NAME
FOCUS FAR to program names
RESET PROGRAMMABLE NAMES
EXIT
ON/OFF
ON/OFF
ON/OFF
ON/OFF
OFF/ON
SpeedDome Ultra VII Operator's Manual