4.4.4 LACP Setting
This page is used to configure the LACP system priority setting. The LACP Setting screens in
appear.
The page includes the following fields:
Object
System Priority
Buttons
: Click to apply changes.
The page includes the following fields:
Object
System Priority
Figure 4-4-8 LACP Setting Page Screenshot
Description
A value which is used to identify the active LACP. The LRP Managed Switch with
the lowest value has the highest priority and is selected as the active LACP peer
of the trunk group.
Figure 4-4-9 LACP Information Page Screenshot
Description
Display the current system priority.
105
User's Manual of LRP-822CS
Figure 4-4-8
&
Figure 4-4-9