Table of Contents
Advertisement
Schedule
Priority
Current Used [mA]
Power Used [W]
Power Allocation
Buttons
: Click to apply changes.
Schedule: enable PoE function in schedule mode.
Indicates the scheduled profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
The Priority represents PoE ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in case the total power consumption is over the total power
budget. In this case the port with the lowest priority will be turned off, and offer
power for the port of higher priority.
The Power Used shows how much current the PD currently is using.
The Power Used shows how much power the PD currently is using.
It can limit the port PoE supply watts. Per port maximum value must be less
than 30.8 watts. Total port values must be less than the Power Reservation
value. Once power overload is detected, the port will auto shut down and keep
in detection mode until PD's power consumption is lower than the power limit
value
330
User's Manual of LRP-822CS
Advertisement
Table of Contents
