Related Manuals for Planet GSW-1820VHP
Summary of Contents for Planet GSW-1820VHP
- Page 1 16-/24-Port 10/100/1000T 802.3at PoE + 2-Port Gigabit SFP Ethernet Switch GSW-1820VHP/GSW-2620VHP User’s Manual...
- Page 2 Copyright Copyright © 2017 by PLANET Technology Corp. All rights reserved. No part of this publication may be re-produced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or oth- erwise, without the prior written permission of PLANET.
- Page 3 Do not dispose of WEEE as unsorted mu-nicipal waste; WEEE should be collected separately. Revision PLANET 16-/24-Port 10/100/1000T 802.3at PoE+ 2-Port Gigabit SFP Ethernet Switch User's Manual Models: GSW-1820VHP, GSW-2620VHP Revision: 2.0 (Oct., 2017)
-
Page 4: Table Of Contents
Table of Contents 1. Introduction ....................5 1.1 Package Contents ................5 1.2 Product Description ................6 1.3 Features ....................10 1.4 Specifications ..................12 2. Hardware Description .................14 2.1 Front Panel ..................14 2.1.1 LCD Monitor Indicators ..............15 2.1.2 LED Indicators ................16 2.2 Rear Panel ..................17 2.3 LCD Management ................18 2.3.1 Switch Mode ................19... -
Page 5: Introduction
1. Introduction Thank you for purchasing PLANET 16/24-Port 10/100/1000T 802.3at PoE+ 2-Port Gigabit SFP Ethernet Switch series, GSW-1820VHP and GSW-2620VHP. The descriptions of these models are shown below: 16-Port 10/100/1000T 802.3at PoE + 2-Port Gigabit SFP GSW-1820VHP Ethernet Switch 24-Port 10/100/1000T 802.3at PoE + 2-Port Gigabit SFP... -
Page 6: Product Description
1.2 Product Description Ideal High-performance Integration Solution for Secure IP Surveillance Infrastructure Particularly designed for the growing popular IP surveillance applications, PLANET GSW 802.3at PoE+ Switch series is positioned as a surveillance switch with the central power management and IP camera monitoring. - Page 7 Just “Plug and Watch” for a Quick Solution The GSW 802.3at PoE+ Switch series is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.
- Page 8 < E n t e r > : Co n f i r m < B a c k> : R e t u r n t o s e l e c t System GSW-2620VHP Menu (5 sec) PLANET 802.3af/at PoE Switch Model: FGSW-2622VHP HW ver: V2.0 Enter SW ver: V3.01 www.planet.com.tw...
- Page 9 Access Denied To Port 1~16 Access Permitted Standard VLAN < Extend IP Camera GSW-1820VHP 1000BASE-SX/LX Fiber-optic 1000BASE-T UTP with PoE 1000 1000BASE-T UTP In the Extend operation mode, the GSW 802.3at PoE+ Switch series operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable.
-
Page 10: Features
MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables. 1.3 Features Physical Port GSW-1820VHP „ 16-port 10/100/1000BASE-T Gigabit RJ45 copper „ 2 1000BASE-X mini-GBIC SFP interfaces GSW-2620VHP „ 24-port 10/100/1000BASE-T Gigabit RJ45 copper „... - Page 11 „ 300-watt PoE budget „ Auto detects powered device (PD) „ Circuit protection prevents power interference between ports „ Remote power feeding up to 100m in standard mode and 250m in extend mode Smart LCD „ LCD switch mode for “Standard”, “VLAN” and “Extend” mode selection; the “Extend”...
-
Page 12: Specifications
„ Supports contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection „ Supports ±6KV surge immunity 1.4 Specifications Model GSW-1820VHP GSW-2620VHP Hardware Specifications 802.3af/at PoE Injector Port 10/100/1000BASE-T MDI/ MDIX Ports 1000BASE-X SFP/mini-GBIC Slots... - Page 13 Thermal Fan Contact discharge of ±6KV DC ESD Protection Air discharge of ±8KV DC Surge Protection ±6KV Power over Ethernet IEEE 802.3af Power over Ethernet/PSE PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span Per port 53V-54V DC, 300mA. max. 15.4 watts (IEEE 802.3af) PoE Power Output Per port 53V-54V DC, 600mA.
-
Page 14: Hardware Description
From 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilo- meters (single-mode fiber). „ Smart LCD The Smart LCD that is located on the front panel of the GSW-1820VHP, GSW- 2620VHP 802.3at PoE+ Switch provides “PoE Management and Status”, “Switch Mode: Standard, VLAN, Extend”, “Budget and Bandwidth... -
Page 15: Lcd Monitor Indicators
Power Low-voltage Protection Power Over-voltage Protection PSE Over-temperature Protection 1. The LCD screens of the GSW-1820VHP and GSW-2620VHP are the same, except the number of ports and port allocation. 2. The LCD screens of the GSW-1820VHP and GSW-2620VHP will refresh every 15 seconds. -
Page 16: Led Indicators
Parameters Description It means the port corresponding to the PSE is lightly loaded and the port stops powering (When the current on the network is less than 7.5mA, the PSE thinks the PD has been dialed out and the port stops powering). It means the port corresponding to the PSE appears to be short-circuited and the port stops powering. -
Page 17: Rear Panel
The rear panel of the 802.3at PoE+ Switch has an AC power socket (100 to 240V AC, 50-60Hz, 5A). 100~240V AC 50/60Hz, 5A max. Figure 2-3: GSW-1820VHP/GSW-2620VHP Switch Rear Panel „ AC Power Receptacle For compatibility with electrical outlet standard in most areas of the world, the 802.3at PoE+ Switch’s power supply automatically adjusts to line power in the... -
Page 18: Lcd Management
2.3 LCD Management The operation of the 5 buttons (Menu, Enter, Back, Up and Down) on the panel: Switch Port Information Menu (5 sec) 30.3 W ---M 867M ---- W ---M ---M ---- W ---M ---M -8.3 W ---M -<1M ---M ---M ---- W ---M ---M... -
Page 19: Switch Mode
This mode makes This mode makes GSW-1820VHP operate as a GSW-2620VHP operate as a VLAN isolation switch and VLAN isolation switch and 1. Port 1 to port 16 will isolate 1. Port 1 to port 24 will isolate VLAN respectively. - Page 20 Standard Mode (default) Standard < PoE IP Camera VLAN Extend Power GSW-1820VHP 100 meters (328 feet) 1000BASE-T UTP with PoE VLAN Isolation Mode IP Camera Port 1 to 16 Port 17 and 18 IP Camera 1000 Access Denied To Port 1~16 Access Permitted Standard VLAN <...
-
Page 21: Budget Control
2.3.2 Budget Control Due to the power allocation strategy of PSE, when the residual power of PoE is too large, the power distribution of the port can be increased as much as possible by increasing the power trimming of the PSE, so that the utilization of the PSE power supply can be improved. -
Page 22: Pse Port Enable
2.3.4 PSE Port Enable Allows user to disable or enable per port PoE function. The default is “Enable”. 2.3.5 PD Type Changing the PoE power-up mode can let non-standard PDs pass the procedures of PoE power delivery process. This way, the switch can supply power to non- standard PDs. -
Page 23: Alive Check
2.3.6 Alive Check The GSW 802.3at PoE+ Switch series can be configured to monitor connected PD’s status in realtime via traffic detection. Once there is no traffic at interval time, the GSW 802.3at PoE+ Switch series is going to restart PoE port power, and bring the PD back to work. -
Page 24: Bandwidth Detection
The PD Alive Check is not a defining standard, so the PoE device on the market doesn’t report reboots done information to the PoE Switch. So user has to make sure how long it takes for the PD to finish booting, and then set the time value related column. -
Page 25: Screen Saver
2.3.9 Screen Saver There are four levels of budget control, namely Always ON, 10min (default), 20min and 30min. 2.3.10 Language There are two languages, namely English and Chinese. -
Page 26: Default Setting
2.3.11 Default Setting Press “Yes” to reset to default. 2.3.12 System Show the system information. -
Page 27: Hardware Installation
3. Hardware Installation Start up Please refer to the following for your cabling: 10/100/1000BASE-T 10/100/1000BASE-T ports come with Auto-Negotiation capability. They automatically support 1000BASE-T, 100BASE-TX and 10BASE-T networks. Users only need to plug a working network device into one of the 10/100/1000BASE-T ports, and then turn on the 802.3at PoE+ Switch. -
Page 28: Desktop Installation
3.1 Desktop Installation To install the 802.3at PoE+ Switch on desktop, simply follow the following steps: Step 1: Attach the rubber feet to the recessed areas on the bottom of the 802.3at PoE+ Ethernet Switch, as shown in Figure 3-1. Men u (5 sec) Ente r... -
Page 29: Rack Mounting
3.2 Rack Mounting To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the instructions described below. Step 1: Place your 802.3at PoE+ Switch on a hard flat surface, with the front panel positioned towards your front side. Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+ Switch with supplied screws attached to the package. -
Page 30: Installing The Sfp Transceiver
Figure 3-4: Plug In the SFP Transceiver „ Approved PLANET SFP Transceivers PLANET 802.3at PoE+ Switch supports both single mode and multi-mode SFP transceivers. The following list of approved PLANET SFP transceivers is correct at the time of publication: Gigabit SFP Transceiver Modules „... - Page 31 It is recommended to use PLANET SFP on the 802.3at PoE+ Switch. If you insert an SFP transceiver that is not supported, the 802.3at PoE+ Switch will not recognize it. Note 1. Before we connect the 802.3at PoE+ Switch to the other network device, we have to make sure both sides of the SFP transceivers are with the same media type, for example, 1000BASE-SX to 1000BASE-SX;...
-
Page 32: Product Applications
AP group for enterprises. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the power-socket limitation, the 802.3at PoE+ Switch makes the installation of cameras easier and more efficient. PC Group PoE IP GSW-1820VHP Camera 1000 PoE Wireless AP Laptop Core Switch 802.3af Splitter... -
Page 33: Power Over Ethernet Powered Devices
3.5 Power over Ethernet Powered Devices Voice over IP Phones As many as PoE VoIP phones, ATAs and other Ethernet/ non-Ethernet end-devices can be installed, but UPS is needed for uninterrupted power system and power control 3~5 watts system. Wireless LAN Access Points Access points can readily be installed in museums, sightseeing sites, airports, hotels, campuses, factories and warehouses. -
Page 34: Power Over Ethernet Overview
4. Power over Ethernet Overview What is PoE? PoE is an abbreviation of Power over Ethernet. The PoE technology means a system safely transmits both power and data on Ethernet UTP cable. The IEEE standard for PoE technology requires Category 5 cable or higher for high power PoE levels, but can operate with Cat3 cable for low power levels. - Page 35 intermediary device between a non-PoE capable switch and a PoE device, it is called a mid-span. An external PoE injector is a mid-span device. Powered Device A powered device (PD) is a device powered by a PSE and thus consumes energy. Examples include wireless access points, IP phones, and IP cameras.
- Page 36 The data pairs are used. Since Ethernet pairs are transformers coupled at each end, it is possible to apply DC power to the center tap of the isolated transformer without upsetting the data transfer. In this mode of operation, the pair on pins 3 and 6 and the pair on pins 1 and 2 can be of either polarity.
-
Page 37: Troubleshooting
Solution: Please check the cable type of the connection from GSW-1820VHP/GSW-2620VHP to the other end. The cable should be an 8-wire UTP, Category 5 or above and EIA568 cable within 100 meters. A cable with only 4-wire, short loop or over 100 meters will affect the power supply. -
Page 38: Appendix A Networking Connection
Appendix A Networking Connection A.1 Switch’s Data RJ45 Pin Assignments - 1000Mbps, 1000BASE-T PIN NO MDI-X BI_DA+ BI_DB+ BI_DA- BI_DB- BI_DB+ BI_DA+ BI_DC+ BI_DD+ BI_DC- BI_DD- BI_DB- BI_DA- BI_DD+ BI_DC+ BI_DD- BI_DC- Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly forbidden, is beyond the scope of this standard. - Page 39 The standard cable, RJ45 pin assignment The standard RJ45 receptacle/connector There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and color of straight-through cable and crossover cable connection: Straight Cable SIDE 1 SIDE 2 1 = White/Orange...
-
Page 40: Ec Declaration Of Conformity
*Type of Product : 16/24-Port 10/100/1000T 802.3at PoE + 2-Port Gigabit SFP Ethernet Switch with LCD PoE Monitor *Model Number : GSW-1820VHP, GSW-2620VHP * Produced by: : Planet Technology Corp. Manufacturer‘s Name Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,...