Table of Contents
Advertisement
Buttons
: Click to apply changes.
The page includes the following fields:
Object
Port Name
Enable State
L2 Entry Num
Action
and reconnected on the port (by disconnecting the cable), the port will
remain shut down. There are three ways to re-open the port:
1) Disable and re-enable Limit Control on the port or the switch,
2) Click the Reopen button.
Discard: If Limit + 1 MAC addresses is seen on the port, it will trigger the
action that do not learn the new MAC and drop the package.
Figure 4-9-65 Port Security Status Page Screenshot
Description
The switch port number of the logical port
Display the current per port security status
Display the current L2 entry number
Display the current action
264
User's Manual of LRP-822CS
Advertisement
Table of Contents
