Planet LRP-822CS User Manual page 280

 Destination Port
 TCP Flags
 Range: If you want to filter a specific source port range filter with this ACE, you
can enter a specific source port range value. A field for entering a source port
value appears. The allowed range is 0 to 65535. A frame that hits this ACE
matches this source port value.
Specify the destination port for this ACE.
 Any: No specifc destination port is specified (destination port status is
"don't-care").
 Single: If you want to filter a specific destination port with this ACE, you can enter
a specific destiantino port value. A field for entering a destiantino port value
appears. The allowed range is 0 to 65535. A frame that hits this ACE matches this
destination port value.
Range: If you want to filter a specific destiantion port range filter with this ACE,

you can enter a specific destiantion port range value. A field for entering a
destination port value appears.
UGR Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.
 Set: TCP frames where the URG field is set must be able to match this
entry.
 Unset: TCP frames where the URG field is set must not be able to
match this entry.
 Don't Care: Any value is allowed ("don't-care").
ACK Specify the TCP "Acknowledgment field significant" (ACK) value for this
ACE.
 Set: TCP frames where the ACK field is set must be able to match this
entry.
 Unset: TCP frames where the ACK field is set must not be able to match
this entry.
 Don't Care: Any value is allowed ("don't-care").
PSH Specify the TCP "Push Function" (PSH) value for this ACE.
 Set: TCP frames where the PSH field is set must be able to match this
entry.
 Unset: TCP frames where the PSH field is set must not be able to match
this entry.
 Don't Care: Any value is allowed ("don't-care").

RST
Specify the TCP "Reset the connection" (RST) value for this ACE.
Set: TCP frames where the RST field is set must be able to match this
entry.
 Unset: TCP frames where the RST field is set must not be able to match
this entry.
 Don't Care: Any value is allowed ("don't-care").
280
User's Manual of LRP-822CS