Planet LRP-822CS User Manual page 104

Buttons
: Click to apply changes.
The page includes the following fields:
Object
 LAG
 Description
 Port Type
 Enable State
 Speed
 Duplex
 Flow Control Config
 Flow Control Status
frames on the port are transmitted. The RX and TX settings are determined by
the result of the last Auto-Negotiation. Check the configured column to use flow
control. This setting is related to the setting for Configured Link Speed.
Figure 4-4-7 LAG Port Status Page Screenshot
Description
The LAG for the settings contained in the same row
Display the current description
Display the current port type
Display the current enable state
Display the current speed
Display the current duplex mode
Display the current flow control configuration
Display the current flow control status
104
User's Manual of LRP-822CS