Table of Contents
Advertisement
4.8.4.2 Egress Bandwidth Control
This page provides to select the egress bandwidth preamble. The Egress Bandwidth Control Setting and Status screens in
Figure 4-8-18
&
Figure 4-8-19
The page includes the following fields:
Object
Port
State
Rate (Kbps)
Buttons
: Click to apply changes.
appear.
Figure 4-8-18 Egress Bandwidth Control Settings Page Screenshot
Description
Select port number from this drop-down list
Enable or disable the port rate policer.
The default value is "Disabled".
Configure the rate for the port policer.
The default value is "unlimited".
Valid values are in the range
Figure 4-8-19 Egress Bandwidth Control Status Page Screenshot
0 to
1000000.
202
User's Manual of LRP-822CS
Advertisement
Table of Contents
