The page includes the following fields:
Object
Port
State
Rate (Kbps)
Buttons
: Click to apply changes.
The page includes the following fields:
Object
Port
Ingress Rate Limit (Kbps)
Figure 4-8-16 Ingress Bandwidth Control Settings Page Screenshot
Description
Select port number from this drop-down list
Enable or disable the port rate policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
Figure 4-8-17 Ingress Bandwidth Control Status Page Screenshot
Description
The switch port number of the logical port
Display the current ingress rate limit
201
User's Manual of LRP-822CS