The switch also updates the entries in the binding file. The frequency at which the file is updated is based on a configurable
delay, and the updates are batched. If the file is not updated in a specified time (set by the write-delay and abort-timeout values),
the update stops.
The DHCP Snooping Database and Information screens in
The page includes the following fields:
Object
Database Type
File Name
Remote Server
Write Delay
Timeout
Figure 4-9-40 DHCP Snooping Database Setting Page Screenshot
Description
Select database type
The name of file image
Fill in your remote server IP address
Specify the duration for which the transfer should be delayed after the binding
database changes. The range is from 15 to 86400 seconds. The default is 300
seconds (5 minutes).
Specify when to stop the database transfer process after the binding database
changes.
The range is from 0 to 86400. Use 0 for an infinite duration. The default is 300
seconds (5 minutes).
Figure 4-9-40
&
Figure 4-9-41
246
User's Manual of LRP-822CS
appear.