The page includes the following fields:
Object
Server Address
SNMP Version
Notify Type
Community Name
UDP Port
Time Out
Retries
Buttons
: Click to add a new SNMPv1, 2 host entry.
The page includes the following fields:
Object
Server Address
SNMP Version
Notify Type
Community Name
UDP Port
Time Out
Retries
Description
Indicates the SNMP trap destination address. It allow a valid IP address in dotted
decimal notation ('x.y.z.w'). It can also represent a legally valid IPv4 address. For
example, '::192.1.2.34'.
Indicates the SNMP trap supported version. Possible versions are:
SNMP v1: Set SNMP trap supported version 1.
SNMP v2c: Set SNMP trap supported version 2c.
Set the notify type in traps or informs.
Indicates the community access string when send SNMP trap packet.
Indicates the SNMP trap destination port. SNMP Agent will send SNMP message
via this port, the port range is 1~65535.
Indicates the SNMP trap inform timeout. The allowed range is 1 to 300.
Indicates the SNMP trap inform retry times. The allowed range is 1 to 255.
Figure 4-2-32 SNMPv1, 2 Host Status Page Screenshot
Description
Display the current server address
Display the current SNMP version
Display the current notify type
Display the current community name
Display the current UDP port
Display the current time out
Display the current retry times
73
User's Manual of LRP-822CS