Onvif - American Dynamics illustra 600 Installation & Operation Manual

4.3.6 ONVIF

ONVIF is a standard that ensures interoperability between IP-based physical security products regardless
of manufacturer. This camera is ONVIF compliant and you can configure whether the camera can be
found by other ONVIF compliant products and the related settings.
 Discovery via ONVIF: Check this option if you want the camera to be discovered by other ONVIF
compliant devices in a network, e.g., an ONVIF compliant NVR.
 Accept command/functionality outside of Discovery capability: If checked, the camera is
allowed to accept command from ONVIF compliant device thus changing the camera's
functionality.
 User Authentication: If an ONVIF compliant device needs authentication for communication,
then you should enable this option.
Notes:
If you are using the illustra Connect tool to discover the camera, the PC that runs the tool must
synchronize its time clock with the camera to ensure a successful authentication.
To do so:
1. Go to Network > NTP and set the Time Zone to be the same as the one used by the PC.
2. Go to System > Date & Time and enable the "Synchronize with Computer Clock" option.
4. Using illustra Utility
43