IBM x3850 X6 Planning And Implementation Manual page 181

Unassigned node: The servers are not a part of the assigned group and need to be added.
The processors cannot be accessed and the node will not function in an unassigned state.
After it has been added, the node can be assigned as a partition mode or assigned as
stand-alone mode. See Figure 5-39 for an example of two nodes in an unassigned state.
Figure 5-39 Scalable complex window with unassigned nodes
The IMM2 web interface scalable complex window allows you to perform the following
functions on assigned nodes:
Power Actions:
– Power on/off the nodes immediately, shut down OS and power off, and restart the
nodes. See Figure 5-40.
Figure 5-40 Scalable complex window - Power Actions
Chapter 5. Preparing the hardware
165