Set Print Suppress; Print Suppress; Reset Print Suppress Mode - Oki ML1120 Technical Reference Manual

S
ET PRINT SUPPRESS
> Code: DC3
> Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
Upon receipt of this command the printer is placed in the
inactive state.
> Additional details:
All data is unavailable after receiving this code.
The SEL/BUSY signal will not be changed by this command.
P
RINT SUPPRESS
> Code: ESC Q n
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
This printer mode will not allow the printer to receive any
data except DC1.
> Range:
n = 36
> Additional details:
The printer cannot be reselected by using the Select key.
The SEL LED will flash while in Print Suppress mode.
R
ESET PRINT SUPPRESS MODE
> Code: DC1
> Compatibility:
ML1190 eco: IBM
Technical Reference Guide – Command descriptions > 171