Identifying Component Parts; Front View - Oki ML1120 Technical Reference Manual

NOTE
It is not recommended that you use either the parallel or USB
port when the RS-232C option is installed in this product.
I
DENTIFYING COMPONENT PARTS
The main parts of your printer are identified and briefly explained
below.
F
RONT VIEW
6
1. Print Head: prints the characters on the paper.
2. Paper Type Lever: set according to the type of paper used
– cut sheet or continuous forms.
3. Platen Knob: turn to move or eject the paper.
4. Paper Thickness Lever: set according to the thickness of
the paper. There is also a setting to facilitate ribbon
replacement.
5. Control Panel: contains button switches and indicators
(described in detail later) that allow you to operate the
printer.
9
8
7
5
Technical Reference Guide – Introduction > 13
1
4
2
3