SWITCH
SEL
LF/
FF
O
O
NOTE
When a Maintenance Mode is launched, the SEL LED lights
and waits for the switch to be pressed.
M
AINTENANCE MODE
SWITCH
SEL
LF/
FF
X
NOTE
The above mode appears by pressing and holding down the
switch marked X and then pressing the switch marked O.
S
PECIAL SWITCH OPERATIONS
Hex Dump mode
>
Enter Hex Dump mode by pressing the SEL + LOAD/EJECT
buttons at power ON.
>
Exit Hex Dump mode by switching the printer OFF.
>
The function of the other buttons does not change, that is,
the SEL, LF/FF, LOAD/EJECT and TEAR buttons all have
the same function as when in normal print mode.
>
For more information, see
page
80.
Technical Reference Guide – Operator interface > 39
LOAD/EJECT
X
2
LOAD/EJECT
O
MENU TYPES
TEAR
O
Activates Maintenance
Mode 2
(Note 1)
MENU TYPES
TEAR
Activates Flash
Loading mode
"Hexadecimal Dump mode" on