Set Print Mode - Oki OKIPOS X400 Manual

Command Structure <ESC>CPa
Command Function To optimize the print head heat management algorithms.
Input to Printer
Printer Output
Special Notes The print mode setting is stored in nonvolatile memory and will not change until a
new Set Print Mode command is received. The current print mode can be verified by
printing a test label.

Set Print Mode

a = 0 for Direct Thermal Printing (without ribbon)
1 for Thermal Transfer Printing (with ribbon)
Example: <ESC>CP0
Placement: Must precede all other commands in the data stream.
Default: 1 for OKIPOS X400 model.
<ESC>A
<ESC>CP0
<ESC>Z
There is no printer output as a result of this command.
95