Print Suppress Mode; Paper Out Sensor; Emulation Mode - Oki MICROLINE 591Elite User Manual

Epson
The ESC > command sets the most significant bit (MSB) of an 8-bit data input to 1.
The ESC = command sets the MSB to 0. ESC # cancels MSB control established by
either ESC > or ESC = and all data is interpreted exactly as sent from the computer.

Print suppress mode

Begin print suppress mode
Begin print suppress mode
n = 1: Begin half speed printing n = 0: Begin full speed printing
Begin print suppress mode
End print suppress mode
After the printer has received one of the commands to begin print suppress mode, it
ignores all data until it receives the DC1 command. The SEL light will blink when the
printer is in print suppress mode.
Paper-Out Override
Any time you want to disable the paper-out switch to keep the printer printing to the
very bottom of the page, enter:

Paper out sensor

Paper out sensor OFF
Paper out sensor ON

Emulation Mode

This command will change the emulation of the printer to the specified mode.
Emulation mode
Emulation mode
n = 00H IBM PPR emulation
01H Trapped
02H IBM PPR emulation
03H IBM AGM emulation
3 – 40
Decimal Hex
19 13
27 81 n 1B 51 n
27 106 1B 6A
17 11
Decimal Hex
27 56 1B 38
27 57 1B 39
Decimal Hex
27 123 n 1B 7B n
n = 40H Epson LQ emulation
ASCII
DC3
ESC Q n
ESC j
DC1
ASCII
ESC 8
ESC 9
ASCII
ESC { n
41H Epson LQ emulation
Comp
E
P A
P A
E P A
Comp
E P A
E P A
Comp
E P A