2. The length-to-width ratio of paper is 1 : 2/3 – 2.
3. Use paper that is neither folded nor distorted.
4. Glue should be applied to the insertion end of each form.
5. For paper with binding holes, see
page
235.
6. Printing accuracy is assured from 6.35 mm (1/4 in)
(inclusive) from each edge.
7. NEVER process and use continuous paper as single paper/
cut-sheet.
P
APER QUALITY
The following paper quality is usable:
TYPE
Single-part form
Multipart form
NOTE
Paper smoothness is between 90 and 7 seconds.
For paper types other than the above, adequate prior testing
should be carried out to ensure that the paper types do not
create problems.
P
APER WEIGHT AND MAX
The following table shows usable paper weights and the
maximum number of form parts:
TYPE
PAPER
QUALITY
Single-part
High quality
form
paper
Technical Reference Guide – Appendix D – Media specifications > 241
PAPER QUALITY
White, high quality paper
Pressure-sensitive paper, carbon-backed paper
.
.
NO
OF FORM PARTS
WEIGHT
(NOTE 1)
45 to 70 kg
(52 to 90
gsm)
"Binding holes" on
MAXIMUM
TOTAL
NUMBER
PAPER
OF FORM
THICKNESS
PARTS
–
–