Oki ML1120 Technical Reference Manual page 89

Defined values beyond the left or right margins are
ignored.
> Additional details:
This relative setting defines the next printing position by
calculating on the basis of the printing position
immediately preceding the input of this code. Printing
starts at a position before or after the previous position at
a dot spacing defined by the selected print mode.
Positive values move the print position to the right and
negative values move it to the left.
Dot position = n1 + n2 * 256.
Physical position = dot position/density = (n1 + n2*256)/
DPI.
With the score mode selected, score is added only for skip
to right.
Actual relative dot positioning depends on the current
mode.
Dots/line:
Example:
Technical Reference Guide – Command descriptions > 89
ML1120 eco : All CPI
ML1190 eco : Utility-All
CPI & Prop
ML1190 eco – All CPI &
Prop
DOTS NUMBER
2448
|
|
3
2
1
DPI VALUE
120 1272
180 1908
N2 N1
09 90
| |
| |
0 3
0 2
0 1