If inter-character clearance is defined while the High Speed
Draft (HSD) mode is selected, additional blank dot columns
will be suppressed.
The HSD mode will be suppressed during proportional print
mode.
Accessible addresses:
03H – 06H
15H
20H – 7FH
80H – AFH
E0H – F3H
F6H – FFH
Other areas will not be printed in High Speed draft mode.
See
"Appendix B – Print modes/features" on page 210
UTL & LQ Print Mode/Features Combination Priority Charts.
P
RINT QUALITY
>
Code: ESC ( n
>
Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
>
Function:
Select High Speed Draft Character Set.
>
Range: n = 00H, 30H, 80H, or B0H HSD is selected.
If n has any other value, the current mode will remain
effective.
>
Details:
If inter-character clearance is defined while the High Speed
Draft (HSD) mode is selected, additional blank dot columns
will be suppressed.
The HSD mode will be suppressed during the proportional
print mode.
Accessible addresses:
Technical Reference Guide – Command descriptions > 135
–
HSD
SELECT
for