Environmental Conditions; Noise - Oki ML1120 Technical Reference Manual

> Dielectric strength
3000 VAC (50/60 Hz)
(No damage will result when the above voltage is applied
between the AC input line and frame for 1 minute.)
E
NVIRONMENTAL CONDITIONS
> Ambient temperature and relative humidity
CONDITION
Operating
Storage
The printer must be packaged during storage.
Avoid condensation at all times.
> Vibration
Operating: 0.3G (5 – 150 Hz) or less (except at resonant
frequency).
Non-operating: 1G (5 – 150 Hz) or less (except at resonant
frequency).
Packing: 1.05G (5 -150 Hz) or less (except at resonant
frequency).
> Impact (Drop)
Packing: 0.914 m (36 in) (one corner, three edges and six
sides)
N
OISE
> Measurement method
The printer is placed 2.46 ft (0.75 m) above the floor and
the microphone is set 3.28 ft (1 m) and 4.92 ft (1.5 m)
above the floor (in compliance with ISO 7779).
> Printing operation
Technical Reference Guide – Specifications > 181
TEMPERATURE
41 – 95°F
(5 – 35 °C)
14 – 122 °F
(-10 – 50 °C)
REL. HUMIDITY
20 – 80% RH
5 – 95% RH