Applying Effects To Output Audio - Roland v-1hd Owner's Manual

Applying Effects to Output Audio

This applies effects and adjusts the sound quality for
output audio.
1.
Press the [AUDIO] button to display the AUDIO
menu.
2.
Use the [ ] and [ ] buttons to select the effect
menu item you want to use.
* For more information about effects, refer to the following
section.
3.
Use the A/B fader to adjust the setting value.
4.
Press the [AUDIO] button to quit the menu.
Equalizer (EQ)
This adjusts the sound quality for each frequency band.
Menu item Explanation
MAIN EQ Hi This boosts or attenuates the high band.
MAIN EQ Hi This adjusts the center frequency when
FREQ changing the sound quality in the high band.
MAIN EQ Mid This boosts or attenuates the middle band.
MAIN EQ Mid This adjusts the center frequency when
FREQ changing the sound quality in the middle band.
MAIN EQ This adjusts the width of the frequency band
Mid Q when boosting or attenuating the middle band.
MAIN EQ Lo This boosts or attenuates the low band.
MAIN EQ Lo This adjusts the center frequency when
FREQ changing the sound quality in the low band.
Mastering (MASTERING)
This adjusts the acoustic characteristics and tone
quality.
Menu item Explanation
MASTERING This switches mastering on and off.
MASTERING This adjusts the degree of application of the
NS noise suppressor.
MASTERING This adjusts the degree of application of the
ENHANCER enhancer.
MASTERING This suppresses high-frequency distortion and
Hi adjusts the sound to have sustained tones.
MASTERING This suppresses midrange distortion and
Mid adjusts the sound to have distinct tones.
MASTERING This suppresses low-frequency distortion and
Lo adjusts the sound to have stable tones.
Reverb (REVERB)
This adds lingering reverberations to the audio.
You can apply reverb to audio input via AUDIO IN,
MIC, and HDMI IN.
Menu item Explanation
This adjusts the return level from reverb
REVERB LEVEL of the audio. A setting of "0" results in no
reverb applied.
REVERB TIME This adjusts the length of the reverb.
This specifies the type of reverb.
ROOM: Produces the natural reverberations
of a highly resonant room.
REVERB TYPE
Produces reverberations like that of
HALL: a performance in a concert hall or
other such space.
1.
Press the [AUDIO] button to display the AUDIO
menu.
2.
Use the [ ] and [ ] buttons to select "REV
SEND" for the input audio on which you want to
apply reverb.
Menu item
HDMI IN 1
:
HDMI IN 4 REV SEND
AUDIO IN
MIC
3.
Use the A/B fader to adjust the amount of audio
sent to reverb.
Repeat steps 2 and 3 as needed to individually
adjust the amount of reverb applied.
4.
Use the [ ] and [ ] buttons to select "REVERB
LEVEL."
5.
Use the A/B fader to adjust the amount of audio
returned from reverb.
This adjusts the depth of overall reverb applied
while maintaining the balance in the degree
of reverb applied to the individual input audio
streams.
6.
Press the [AUDIO] button to quit the menu.
Audio Operations
Explanation
This adjusts the amount of
audio sent to reverb for each
different input audio stream.
27