Applying Effects To Output Audio - Roland V-1HD+ Reference Manual

Applying Reverb
This adds reverberation to the sound.
Adjusting how much reverb to send
1
[SETUP] button 0 select "INPUT 1"–"MIC/AUX IN, " and
press the [VALUE] knob.
2
Use the [VALUE] knob to select "REVERB SEND," and press
the [VALUE] knob.
3
Use the [VALUE] knob to adjust the amount of sound
that is sent to reverb (reverb depth).
4
Press the [MENU] button several times to close the menu.
Adjusting how much reverb is returned
1
[MENU] button 0 "AUDIO OUTPUT" 0 select "REVERB"
and press the [VALUE] knob.
2
Use the [VALUE] knob to select "REVERB," and press the
[VALUE] knob.
3
Use the [VALUE] knob to select "ON," and press the
[VALUE] knob.
Reverb turns on.
4
Use the [VALUE] knob to select "LEVEL," "TYPE," or "SIZE,"
and press the [VALUE] knob.
Menu item Explanation
Specifies the amount of sound that is returned from the
LEVEL reverb (return level). This adjusts the depth of the overall
reverb.
Specifies the reverb type.
ROOM:
Produces the natural-sounding reverberation of a room.
TYPE
HALL:
Produces the reverberation that is typical of a performance
in a concert hall.
Specifies the size of the room. The larger the value, the
SIZE
longer the reverb time.
5
Use the [VALUE] knob to change the value of the setting.
6
Press the [MENU] button several times to close the menu.
MEMO
You can assign the function to the [DSK PVW] or [DSK ON] button
and turn reverb on/off (p. 41).

Applying Effects to Output Audio

Here's how to modify the tonal character by applying effects to the
audio output. You can use limiter, compressor, and equalizer.
1
[MENU] button 0 "AUDIO OUTPUT" 0 select "MAIN
OUTPUT" and press the [VALUE] knob.
2
Using the [VALUE] knob, select the menu item of the
effect you want to use, and press the [VALUE] knob.
* For details on the menu items, refer to "9: AUDIO OUTPUT" (p. 54).
3
Use the [VALUE] knob to change the value of the setting.
4
Press the [MENU] button several times to close the menu.
7 Limiter
Limits the output volume so that is does not exceed the specified
threshold level.
* Distortion will occur if audio that exceeds the allowable range
of the limiter is input.
7 Compressor
Audio that exceeds the specified threshold level is compressed.
This reduces the difference between the maximum volume
and minimum volume, making the audio more comfortable for
listening.
7 Equalizer
This is a three-band equalizer. It lets you adjust the volume by
boosting or cutting three frequency regions.
Audio Operations
35