7: Audio Output - Roland V-60HD Reference Manual

7: AUDIO OUTPUT

Menu item Value
(bold text: default value)
OUTPUT ASSIGN
This specifies the audio bus assigned to the AUDIO OUT connectors (XLR).
AUDIO OUT (XLR) MASTER OUTPUT
AUX
This specifies the audio bus assigned to the AUDIO OUT connectors (RCA).
AUDIO OUT (RCA) MASTER OUTPUT
AUX
This specifies the audio bus assigned to the PHONES jack.
PHONES OUT MASTER OUTPUT
AUX
MASTER OUTPUT
OUTPUT LEVEL -INF–10.0dB
OUTPUT MUTE OFF, ON
EQUALIZER OFF, ON
EQ Hi -15.0–0
EQ Hi FREQ 1.00–10
EQ Mid -15.0–0
EQ Mid FREQ 20.0Hz–500Hz–20.0kHz
EQ Mid Q 0.5–1 0–16.0
EQ Lo -15.0–0
EQ Lo FREQ 20.0–100–500Hz
MULTI BAND COMP OFF, ON
Hi THRESHOLD -40.0– -20
Mid THRESHOLD -40.0– -16
Lo THRESHOLD -40.0– -20
1.00:1, 1.12:1, 1.25:1, 1.40:1, 1.60:1,
Hi RATIO
1.80:1, 2.00:1, 2.50:1, 3.20:1, 4.00:1,
5.60:1, 8.00:1, 16.0:1, INF:1
Mid RATIO
The default values are as follows.
Hi RATIO:
Mid RATIO: 2.50:1
Lo RATIO
Lo RATIO:
LIMITER OFF, ON
THRESHOLD -40.0– -6
AUX
AUX LEVEL -INF–0
AUX MUTE OFF, ON
LIMITER OFF, ON
THRESHOLD -40.0– -6
Explanation
This groups together all input audio and outputs it (master out).
This outputs only the audio on the AUX bus.
This groups together all input audio and outputs it (master out).
This outputs only the audio on the AUX bus.
This groups together all input audio and outputs it (master out).
This outputs only the audio on the AUX bus.
This adjusts the volume level for master out.
This sets the Mute feature on or off. Setting this to "ON" mutes master out.
This sets the equalizer on or off.
Effect Adjusts the sound quality for each frequency band.
0–15.0dB This boosts or attenuates the high band.
0–20.0kHz This adjusts the center frequency when changing the tone quality in the high band.
0–15.0dB This boosts or attenuates the middle band.
This adjusts the center frequency when changing the tone quality in the middle band.
This adjusts the width of the frequency band when boosting or attenuating the middle band.
0–15.0dB This boosts or attenuates the low band.
This adjusts the center frequency when changing the tone quality in the low band.
This switches the multi-band compressor on and off.
Effect This applies separate compressors in individual frequency bands.
0–0.0dB
These set the individual levels that become the thresholds for the high, midrange, and low
0–0.0dB bands at which the compressor is applied. Compression is applied to audio that exceeds the
threshold.
0–0.0dB
These set the amount of compression applied in the high, midrange, and low bands. The state
in which no compression is applied is defined as "1. "
3.20:1
3.20:1
This sets the limiter on or off.
Effect This limits the output volume so that is does not exceed the set level.
This sets the level that becomes the threshold at which the limiter is applied. Compression is
0–0.0dB applied to audio that exceeds the threshold. The volume level of audio that is output is limited
so as to stay to below the threshold.
0–10.0dB This adjusts the volume level of audio on the AUX bus.
This sets the Mute feature on or off. Setting this to "ON" mutes the AUX-bus audio.
This sets the limiter on or off.
Effect This limits the output volume so that is does not exceed the set level.
This sets the level that becomes the threshold at which the limiter is applied. Compression is
0–0.0dB applied to audio that exceeds the threshold. The volume level of audio that is output is limited
so as to stay to below the threshold.
Menu List
9