7: Audio Output - Roland XS-62S Reference Manual

7: AUDIO OUTPUT

Menu item Value (bold text: default value) Explanation
OUTPUT ASSIGN
AUDIO OUT (XLR) PGM/1, PVW/2, AUX/3
AUDIO OUT (RCA) PGM/1, PVW/2, AUX/3
PHONES OUT PGM/1, PVW/2, AUX/3
MASTER OUTPUT
-INF–10.0dB
OUTPUT LEVEL
OUTPUT MUTE OFF, ON
EQ Hi -15.0–0
EQ Hi FREQ 1.00–10
EQ Mid
-15.0–0
EQ Mid FREQ 20.0Hz–500Hz–20.0kHz
EQ Mid Q
0.5–1
EQ Lo -15.0–0
EQ Lo FREQ 20.0–100–500Hz
OFF, ON
MB COMP
MB COMP H THLD -40.0–
MB COMP M THLD
-40.0–
MB COMP L THLD -40.0–
1.00:1, 1.12:1, 1.25:1, 1.40:1,
MB COMP H RATIO 1.60:1, 1.80:1, 2.00:1, 2.50:1,
3.20:1, 4.00:1, 5.60:1, 8.00:1,
16.0:1, INF:1
MB COMP M RATIO
The default values are as
follows.
MB COMP H RATIO:
MB COMP H RATIO:
MB COMP L RATIO
MB COMP H RATIO:
OFF, ON
LIMITER
LIMITER THLD -40.0–
This specifies the audio bus assigned to the AUDIO OUT connectors (XLR), AUDIO OUT
connectors (RCA), and PHONES connector.
PGM/1
PVW/2
AUX/3
This adjusts the volume level for master out (PGM/1 bus).
This sets the Mute feature on or off. Setting this to "ON" mutes master out (PGM/1 bus).
0–15.0dB This boosts or attenuates the high band.
0–20.0kHz
This adjusts the center frequency when changing the tone quality in the high band.
0–15.0dB
This boosts or attenuates the middle band.
This adjusts the center frequency when changing the tone quality in the middle band.
This adjusts the width of the frequency band when boosting or attenuating the middle
0–16.0
band.
0–15.0dB This boosts or attenuates the low band.
This adjusts the center frequency when changing the tone quality in the low band.
This switches the multi-band compressor on and off.
Effect
-20 0–0.0dB
These set the individual levels that become the thresholds for the high, midrange, and low
-16 0–0.0dB
bands at which the compressor is applied. Compression is applied to audio that exceeds
the threshold.
-20 0–0.0dB
These set the amount of compression applied in the high, midrange, and low bands.
If this is set to "1.00:1, " compression is not applied.
3 20:1
2 50:1
3 20:1
This sets the limiter on or off.
Effect This limits the output volume so that is does not exceed the set level.
This sets the level that becomes the threshold at which the limiter is applied. Compression
-6 0–0.0dB
is applied to audio that exceeds the threshold. The volume level of audio that is output is
limited so as to stay to below the threshold.
This outputs only the audio on the PGM/1 bus.
This outputs only the audio on the PVW/2 bus.
This outputs only the audio on the AUX/3 bus.
This applies separate compressors in the high, midrange, and low
frequency bands.
12
Menu List