Audio Menu - Roland v-1hd Owner's Manual

Appendices

AUDIO Menu

([AUDIO] Button)
* The default value is printed in bold characters.
Setting item
MEMORY1–MEMORY8
HDMI IN 1
:
HDMI IN 4 LEVEL
AUDIO IN
MIC
MASTER OUT LEVEL
AUDIO FOLLOW
HDMI IN 1 EQ Hi
:
EQ Hi FREQ
HDMI IN 4
AUDIO IN EQ Mid
MIC
EQ Mid FREQ 20.0 Hz–2.50 KHz–10.0 KHz
EQ Mid Q
EQ Lo
EQ Lo FREQ
DELAY
MIC COMP
MIC COMP-THRESHOLD
MIC COMP-RATIO
MIC COMP-ATTACK
MIC COMP-RELEASE
MIC GATE
MIC GATE-THRESHOLD
MIC GATE-RELEASE
MIC HPF
MAIN EQ Hi
MAIN EQ Hi FREQ
MAIN EQ Mid
MAIN EQ Mid FREQ
MAIN EQ Mid Q
MAIN EQ Lo
MAIN EQ Lo FREQ
HDMI IN 1
: REV SEND
HDMI IN 4
32
Value
0–100–127
0–100–127
ON, OFF
-15 dB–0 dB–15 dB
700 Hz–8.00 KHz–11.0 KHz
-15 dB–0 dB–15 dB
0.5–16.0
-15 dB–0 dB–15 dB
55 Hz–110 Hz–800 Hz
0.0 ms–500.0 ms
ON, OFF
-50 dB– -16 dB–0 dB
1.0:1–INF:1
0.2 ms–50 ms–100 ms
30 ms–500 ms–5000 ms
ON, OFF
-50 dB– -36 dB–0 dB
30 ms–800 ms–5000 ms
ON, OFF
-15 dB–0 dB–15 dB
700 Hz–8.00 KHz–11.0 KHz
-15 dB–0 dB–15 dB
20.0 Hz–2.50 KHz–10.0 KHz
0.5–16.0
-15 dB–0 dB–15 dB
55 Hz–110 Hz–800 Hz
0–100–127
Explanation
This adjusts the volume level of the respective input audio streams.
* 100 = 0.0 dB, 127 = +6.0 dB
This adjusts the volume level of output audio.
* 100 = 0.0 dB, 127 = +6.0 dB
This sets the Audio Follow feature on or off.
This boosts or attenuates the high band.
This adjusts the center frequency when changing the sound
quality in the high band.
This boosts or attenuates the middle band.
This adjusts the center frequency when changing the sound
quality in the middle band.
This adjusts the width of the frequency band when boosting or
attenuating the middle band.
This boosts or attenuates the low band.
This adjusts the center frequency when changing the sound
quality in the low band.
This adjusts the delay time for audio.
This sets the compressor on or off.
This sets the level used as the threshold when compressing audio.
Compression is applied to audio that exceeds the level set here.
This specifies the degree of compression applied to the audio. The
state in which no compression is applied is defined as "1. "
This sets the time until compression starts when audio exceeding
the threshold is input.
This adjusts the length of time until compression ends after audio
falls below the threshold.
This sets gate on or off.
This sets the level used as the threshold for removing audio. Audio
below the level set here is removed.
This adjusts the length of time until the audio is fully attenuated
after audio falls below the threshold.
This sets the high-pass filter on or off.
This boosts or attenuates the high band.
This adjusts the center frequency when changing the sound
quality in the high band.
This boosts or attenuates the middle band.
This adjusts the center frequency when changing the sound
quality in the middle band.
This adjusts the width of the frequency band when boosting or
attenuating the middle band.
This boosts or attenuates the low band.
This adjusts the center frequency when changing the sound
quality in the low band.
This adjusts the send level of audio to Reverb.