Applying Effects To Output Audio - Roland V-8HD Reference Manual

Audio Operations

Applying Effects to Output Audio

You can modify the tonal character by applying effects to the audio output.
* You can apply a limiter (LIMITER) to the audio of the AUX bus.
1 .
Press the [MENU] button0"AUDIO OUTPUT"0
select "MASTER OUTPUT" or "AUX," and press the
[VALUE] knob.
(for AUX)
2 .
Turn the [VALUE] knob to select an effect menu
item, and then press the [VALUE] knob.
(for AUX)
3 .
Turn the [VALUE] knob to change the value, and
press the [VALUE] knob.
4 .
Press the [MENU] button to quit the menu.
32
LIMITER
This limits the output volume so that is does not exceed the set level.
Menu item Explanation
LIMITER
Turn the limiter on or off.
Adjusts the level that becomes the threshold
at which the limiter is applied.
Compression is applied to audio that exceeds
THRESHOLD
the threshold. The volume level of audio that
is output is limited so as to stay to below the
threshold.
EQUALIZER
This limits the output volume so that is does not exceed the set level.
Menu item Explanation
EQUALIZER Turns the equalizer on/off.
Hi GAIN Boosts or attenuates the high band.
Specifies the center frequency when
Hi FREQUENCY
changing the tone quality in the high band.
Mid GAIN Boosts or attenuates the middle band.
Specifies the center frequency when
Mid FREQUENCY
changing the tone quality in the middle band.
Adjusts the width of the frequency band
Mid Q when boosting or attenuating the middle
band.
Lo GAIN Boosts or attenuates the low band.
Specifies the center frequency when
Lo FREQUENCY
changing the tone quality in the low band.
MULTI BAND COMPRESSOR
This applies separate compressors in individual frequency bands.
Menu item Explanation
MULTI BAND
Turns the multi-band compressor on/off.
COMPRESSOR
Specify the individual levels that become the
Hi THRESHOLD
thresholds for the high, midrange, and low
Mid THRESHOLD bands at which the compressor is applied.
Compression is applied to audio that exceeds
Lo THRESHOLD
the threshold.
Specify the amount of compression applied in
Hi RATIO
the high, midrange, and low bands.
Mid RATIO
The state in which no compression is applied
Lo RATIO
is defined as "1. "