Switching The View Mode Of Preview Output; Inputting Copyright-Protected (Hdcp) Video - Roland v-1hd Owner's Manual

Switching the View Mode of
Preview Output
Three types of view modes are available for the
V-1HD's preview output.
1.
Press and hold the [(TAP) BPM] button (for 2
seconds or longer) to display the SETUP menu.
2.
Use the [ ] and [ ] buttons to select "PREVIEW
OUT."
3.
Use the A/B fader to set the view mode.
Value Explanation
This displays the incoming video on channels
1 through 4 as a four-way split screen.
The input video is arranged as shown below.
Channel
MULTI-
VIEW
Channel
The video is displayed with a colored border
that is interlinked with the selected [A-1]
through [A-4] or [B-1] through [B-4] button.
Red border:
Green border: Video to be output next
OUTPUT This displays the video currently being output.
PREVIEW This displays the video to be output next.
4.
Press the [(TAP) BPM] button to quit the menu.
1 2
Channel
3 4
Channel
Video currently being output
Inputting Copyright-protected
(HDCP) Video
To input copyright-protected (HDCP) video from a
Blu-ray Disc player or the like, you make the setting for
enabling HDCP input.
* The V-1HD must be connected to an HDCP compatible
display for HDCP protected video to be connected.
What's HDCP?
HDCP is copyright-protection technology that prevents
unlawful copying of content by encoding the path when
sending digital signals from a video playback device to a
display monitor or other display equipment.
1.
Press and hold the [(TAP) BPM] button (for 2
seconds or longer) to display the SETUP menu.
2.
Use the [ ] and [ ] buttons to select "HDCP."
3.
Use the A/B fader to set this to "ON."
Value Explanation
Copyright-protected (HDCP) video can be input.
ON
HDCP is also added to the video that is output.
OFF Copyright-protected (HDCP) video cannot be input.
4.
Press the [(TAP) BPM] button to quit the menu.
Operation of the HDCP indicator
The HDCP indicator on the top panel operates as
follows, regardless of input.
"HDCP"
Indicator Connection status
setting
An HDCP-compatible device is connected
Lighted ON
to the OUTPUT or PREVIEW connector.
No HDCP-compatible device is connected
to the OUTPUT or PREVIEW connector.
Flashing ON
Alternatively, a device that does not
support HDCP is connected.
Dark OFF —
Video Input/Output Settings
15