Setup Menu - Roland v-1hd Owner's Manual

Setting item
AUDIO IN
REV SEND
MIC
REVERB LEVEL
REVERB TIME
REVERB TYPE
MASTERING
MASTERING NS
MASTERING ENHANCER
MASTERING Hi
MASTERING Mid
MASTERING Lo
A. FOLLOW AUDIO IN
A. FOLLOW MIC

SETUP Menu

(Pressing and holding the [(TAP) BPM] button for 2 seconds or longer)
* The default value is printed in bold characters.
Setting item
BPM
BPM SYNC
HDCP
OUTPUT CONTRAST
OUTPUT SATURATION
OUTPUT BRIGHTNESS
OUTPUT COLOR SPACE
OUTPUT DVI-D/HDMI
PREVIEW CONTRAST
PREVIEW SATURATION
PREVIEW BRIGHTNESS
PREVIEW COLOR SPACE
PREVIEW DVI-D/HDMI
PREVIEW OUT
PinP BORDER
PinP BORDER COLOR
AUTO SCAN
AUTO SCAN TIME
Value
0–100–127
0–127
0.0 sec–1.0 sec–5.0 sec
ROOM, HALL
ON, OFF
0–127
0–127
0–127
0–127
0–127
1–4, OFF
1–4, OFF
Value
20–120–250
x1/4, x1/2, x1, x2
ON, OFF
-64–0–63
-64–0–63
-64–0–63
AUTO, RGB-FULL, RGB-LIMIT,
YPbPr
AUTO, DVI-D, HDMI
-64–0–63
-64–0–63
-64–0–63
AUTO, RGB-FULL, RGB-LIMIT,
YPbPr
AUTO, DVI-D, HDMI
MULTI-VIEW, OUTPUT, PREVIEW This sets the view mode of preview output.
0–3–15
BLACK, WHITE, GRAY, RED, GREEN,
BLUE, YELLOW
ON, OFF
0 sec–5 sec–120 sec
Explanation
This adjusts the send level of audio to Reverb.
This adjusts the return level from reverb of the audio. A setting of
"0" results in no reverb applied.
This adjusts the length of the reverb.
This specifies the type of reverb.
This switches mastering on and off.
This adjusts the degree of application of the noise suppressor.
This adjusts the degree of application of the enhancer.
This suppresses high-frequency distortion and adjusts the sound to
have sustained tones.
This suppresses midrange distortion and adjusts the sound to have
distinct tones.
This suppresses low-frequency distortion and adjusts the sound to
have stable tones.
This sets the video channel to interlink by Audio Follow with audio
input via AUDIO IN.
* This is effective when "AUDIO FOLLOW" is set to "ON. "
This sets the video channel to interlink by Audio Follow with audio
input via MIC.
* This is effective when "AUDIO FOLLOW" is set to "ON. "
Explanation
This sets the tempo when the BPM sync function is turned on.
When the BPM sync function is turned on, this sets the multiple of
the BPM value to be used as the speed to switch is switched.
When set to "ON, " copyright-protected (HDCP) video can be input.
HDCP is also added to the video that is output.
This adjusts the contrast of the main output video.
This adjusts the color saturation of the main output video.
This adjusts the brightness of the main output video.
This sets the color space (system for representing colors in video)
of the OUTPUT connector.
This sets the output mode of the OUTPUT connector.
This adjusts the contrast of the preview output video.
This adjusts the color saturation of the preview output video.
This adjusts the brightness of the preview output video .
This sets the color space (system for representing colors in video)
of the PREVIEW connector.
This sets the output mode of the PREVIEW connector.
This adjusts the width of the border added to the PinP inset screen.
This specifies the color of the border added to the PinP inset screen.
This sets the Auto Scan function on or off.
When set to "ON, " channels 1 through 4 are switched automatically.
When the Auto Scan function is on, this sets the video display interval.
Appendices
33