Rear Panel (For Equipment Connections) - Roland v-1hd Owner's Manual

Panel Descriptions

Rear Panel (for Equipment Connections)

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making
any connections.
* Be sure to use cables and adaptor plugs with the proper connectors matching those of the other devices you are using.
USB Port
You use V-1HD RCS dedicated software to operate
the V-1HD remotely from a connected computer
or tablet.
[FORMAT] Switch
This switches the input/output format.
* Before setting the input/output format, first be sure
to turn off the power to the V-1HD.
DC IN Connector
This is for connecting the included AC adaptor.
To AC Outlet
Power cord
Place the AC adaptor so the side with the indicator faces
upwards and the side with printed information faces
downwards. The indicator will light when you plug the
AC adaptor into an AC outlet.
* To prevent the inadvertent disruption of
power to your unit (should the plug be pulled
out accidentally), and to avoid applying undue
stress to the jack, anchor the power cord using
the cord hook, as shown in the illustration.
For information on how to attach the cord hook, refer to "Attaching
the Power Cord Hook" (p. 10).
8
p. 29
USB2.0 port
p. 14
AC adaptor
Cord hook
OUTPUT Connector
This outputs the video mixing result (main output
video). Here you can connect a device such as an
external display or projector.
[POWER] Button
This turns the power on and off.
HDMI input
connector
p. 11