4 Replacement Procedures
4.10 QI button assembly / PC card slot brace
4.10.1 QI button assembly
Removing the QI button assembly
The following describes the procedure for removing the QI button assembly. (See Figure
4-14.)
1. Remove the following screw securing the QI button assembly and remove the QI
button assembly.
M2.5x4.0B
?
M2.5x4.0B FLAT BIND
Figure 4-14 Removing the QI button assembly
Installing the QI button assembly
The following describes the procedure for installing the QI button assembly. (See Figure
4-14.)
1. Install the QI button assembly to the slot of bottom cover assembly and secure it
with the following screw.
M2.5x4.0B
?
Note: When installing the QI button assembly, be sure to fit the button portion to the
slot of bottom cover assembly.
Satellite R10 Maintenance Manual (960-509)
4.10 QI button assembly / PC card slot brace
FLAT BIND screw
FLAT BIND screw
x1
QI button assembly
x1
4-25