4.24 PC card slot
4.24 PC card slot
Removing the PC card slot
The following describes the procedure for removing the PC card slot. (See Figure 4-
PCCARD.)
1. Remove the following screws securing the PC card slot.
• M2.0×3.0C
• M2.0×8.0C
2. Remove the PC card slot while pulling out the latch to release it.
M2.0×3.0C S-THIN HEAD
PORTÉGÉ M700 Maintenance Manual (960-661)
S-THIN HEAD screw
S-THIN HEAD screw
PC card slot
Figure 4- PCCARD Removing the PC card slot
4 Replacement Procedures
×2
×2
Latch
M2.0×8.0C S-THIN HEAD
[CONFIDENTIAL]
Rev B
4-67