Lens Holder - Toshiba Satellite R10 Maintenance Manual

Hide thumbs Also See for Satellite R10:

Table of Contents

4.23 Lens holder

Removing the lens holder

The following describes the procedure for removing the lens holder. (See Figure 4-35.)

1. Remove the following screw securing the lens holder.

Remove the lens holder from the cover assembly.

Install ing the lens holder

The following describes the procedure for installing the lens holder. (See Figure 4-35.)

1. Install the lens holder to the cover assembly.

2. Secure the lens holder with the following screw.

S-THIN FLAT BIND screw

Figure 4-35 Removing the lens holder

S-THIN FLAT BIND screw

4 Replacement Procedures

M2.5x4.0B S-THIN FLAT BIND

Satellite R10 Maintenance Manual (960-509)

Table of Contents