Toshiba Satellite R10 Maintenance Manual page 220

3 Tests and Diagnostics
System Auto Off
Use this option to set the duration of the HDD automatic power off function.
It can be set only when the "Resume" id selected in [Power-up mode].
Disabled
xx Min.
LCD Brightness
Use this option to set the level of LCD brightness.
Super-Bright
Bright
Semi-Bright
Cooling Method
Maximum Performance
Performance
Battery optimized
NOTE: Too hot condition may cause defect on the CPU. When the hot condition
continues, the power is automatically turned off in resume mode.
4. Password
This option sets or resets the user password for power on and instant security (Fn+F1).
Registered
Not registered
For details on setting the user password, refer to the User's Manual.
Satellite R10 Maintenance Manual (960-509)
Disables system automatic off function.
Automatically turns off the system if it is not used for the
duration set. The duration xx can be set from 10 to 60 minutes.
Full brightness for maximum visibility.
Full brightness for high visibility.
Less than full brightness for saving power.
If the CPU becomes too hot, the fan turns on
automatically in a high speed to cool down the
CPU.
If the CPU becomes too hot, the fan turns on
automatically. When the CPU temperature falls to
a normal range, the fan turns off.
If the CPU becomes too hot, the processing speed is
lowered. If the temperature is still too high, the fan
turns on. When the CPU temperature falls to a
normal range, the fan is turned off and the
processing speed is increased.
The user password has been registered.
The user password has not been registered.
3.32 SETUP
3-101