Toshiba Satellite R10 Maintenance Manual page 221

3.32 SETUP
5. Boot Priority
(a) Boot Priority
Use this option to set the priority for booting of the computer and the priority for the
HDD for booting.
FDD? HDD? CD-ROM? LAN: The computer looks for bootable files in the
HDD? CD-ROM? LAN? FDD: The computer looks for bootable files in the
FDD? CD-ROM? LAN? HDD: The computer looks for bootable files in the
CD-ROM? LAN? HDD? FDD: The computer looks for bootable files in the
CD-ROM? LAN? FDD? HDD: The computer looks for bootable files in the
HDD? FDD? CD-ROM? LAN: The computer looks for bootable files in the
(*1) CD-ROM refers to a Optical Disk Drive.
NOTE: When a floppy disc drive is not connected, it boots up from SD memory card
in spite of selecting FDD.
(b) HDD Priority
Use this option to set the starting method from hard disk drive.
Built-in HDD ? Second HDD
: Detecting boot command from Built-in HDD (Default)
Second HDD ? Built-in HDD
: Detecting boot command from Second HDD
NOTE: If the boot command can not be detected from the prior HDD, booting
target changes to other devices.
3-102
3 Tests and Diagnostics
following order: FDD, HDD, CD-ROM
(*1) and LAN
following order: HDD, CD-ROM, LAN
and FDD.
following order: FDD, CD-ROM, LAN
and HDD.
following order: CD-ROM, LAN, HDD
and FDD.
following order: CD-ROM, LAN, FDD
and HDD.
following order: HDD, FDD, CD-ROM
and LAN. (Default)
Satellite R10 Maintenance Manual (960-504)